Foliatec Sprayfilm color 2x400ml
Rims, mirrors, grills etc
Article number: FT2061
Show price history
Backorder item | Sent in about 7 working days
One set of Fliatec sprayfilm. Contains 2 bottles 400 mm. Enough for 4 pcs rims. Can also be applied on mirrors, grills etc.
This spray is settle downs as a layer remowable film. Easy to apply and easy to remove
Two bootles should be enough for 4 pcs rims depending on size and how thick layer you paint.
Here below you can see how this look likes when you spray and remove film
Instruktioner:
1: Clean surface you are applying film on very carefully and work in a dustfree room. If dust or grease is going under the film it will not attach fully.
2. Mask the part you will spray , remove it from car in order to work it easier. If you will paint a rim it is important to mask in order not to get too much spary on wheel , it is hard to remove from tires.
3. Apply: Shake bottle well at use and spray several thin layers. In order to remove film later you need to spray at least 4 layers.
4: After approx. 30 minutes spray has hardened to the degree that you can assemble wheel back again
This spray is settle downs as a layer remowable film. Easy to apply and easy to remove
Two bootles should be enough for 4 pcs rims depending on size and how thick layer you paint.
Here below you can see how this look likes when you spray and remove film
Instruktioner:
1: Clean surface you are applying film on very carefully and work in a dustfree room. If dust or grease is going under the film it will not attach fully.
2. Mask the part you will spray , remove it from car in order to work it easier. If you will paint a rim it is important to mask in order not to get too much spary on wheel , it is hard to remove from tires.
3. Apply: Shake bottle well at use and spray several thin layers. In order to remove film later you need to spray at least 4 layers.
4: After approx. 30 minutes spray has hardened to the degree that you can assemble wheel back again