Skip
Protect against stone chips – Buy stylish hood guards here 🛡️
Instagram banner

“Hide-away” LED flashing light White

E-marked, 12-24V
Article number: 5002311

Hide-away LED Flash Light

Mounts in a 25.4mm hole
Cable length 2m
16 different flash patterns
ECE R65 and ECE R10 (ECE R65 does not apply to red)

Show price history
Backorder item | Sent in about 8 working days
Checkmark60 days open purchase on stock items
CheckmarkOver 100,000 satisfied customers
CheckmarkSuper-fast delivery
CheckmarkSupport that assists you
Trygg e-handel

Trygg E-handel

We are certified with Trygg E-handel

This clear glass, compact “Hide-Away” LED strobe/flash light is perfect for recessed mounting. Despite its small size, it provides an incredibly bright and clear light. The light is R65 approved, which means it can be used on public roads (not the red version). Supplied with a 2 meter long cable.

The strobe light is easily installed in a 25.4 mm (1 inch) hole using the supplied rubber gasket. First, the rubber seal is pressed into the hole, then the lamp is put in place and snapped into place. The mounting depth is 40 mm.

A detailed manual with installation instructions is included.

The lamp has 16 different flash patterns (14 for orange and red), and you can group the lights into two separate groups so that they flash alternately (e.g. right/left or top/bottom). Orange and red also support alternating flashing.

Wiring instructions:

The lamps are easily connected as normal lamps with red and black cable for plus and minus:

Red = Plus (12V-24V)
Black = Minus/ground
Yellow = For synchronization, flash patterns and grouping
White = Alternating flash pattern (only for orange and red)

To change the flash pattern, connect the yellow wire to positive, and if you give three quick pulses on positive, the pattern is reset to the first one. A built-in memory function allows the lamp to remember the last pattern used.

Grouping:

Connect both red and yellow wires to plus to activate grouping. The light will flash once or twice to show the set group. To change the group, connect the yellow wire to the plus. The lamp will remember the setting when it is turned off.

Dimensions:

Diameter (including gasket): 36 mm
Hole size: 25,4 mm
Total length: 38 mm
Mounting depth: 45 mm (including cable space)
Cable length: 2 meters

Specifications:

Voltage range: 10-33V
16 flash patterns (14 for orange and red)
ECE R65 and ECE R10 approved (R65 does not apply to red)
IP67 rated (water and dust proof)
Equipped with 4 LED lights

Also available in the colors:

Red (art. no. 5002312)
Orange (art. no. 5002313)

Blue (art. no. 500134)