Skip
Protect against stone chips – Buy stylish hood guards here 🛡️
Instagram banner

Epix9+ Strobe Driving Light 9" White (Powerboost)

Epix9+ Strobe Driving Light 9" White (Powerboost)
Article number: 33491253
  • 1 lumen at 773m
  • E-marked ECE R112 (Ref 30) R7 (white position light) R10
  • 11000 actual lumens
  • Light pattern - Driving Beam
  • Dimensions - Width 225mm Height 223mm(incl.bracket) Depth 86mm
  • Position light Yellow/Orange or Xenon white
  • Flash light with five different flash patterns (one R65 approved)
  • 36 months warranty
Show price history
Backorder item | Sent in about 8 working days
Checkmark60 days open purchase on stock items
CheckmarkOver 100,000 satisfied customers
CheckmarkSuper-fast delivery
CheckmarkSupport that assists you
Trygg e-handel

Trygg E-handel

We are certified with Trygg E-handel

Swedish developed design

Epix9+ from Ledson is a groundbreaking range of auxiliary lights that take your car's appearance to a new level. With a design language uniquely created by Ledson, it combines exceptional performance and style to give your vehicle an eye-catching and exclusive look. Perfect balance between powerful lighting and stylish design.

Dynamic position light

The Epix9+ features a dynamic position light that lights up with an elegant movement, sweeping from one side of the auxiliary light to the other before fully lighting up. This visual effect gives your car a distinctive and unique look.

Pulse-controlled Powerboost - Maximize brightness easily

The Epix9+ is equipped with Ledson Powerboost - a powerful extra mode for those times when you need, or want, maximum light. Activate Powerboost easily by using the high beam lever, giving you full control over the brightness depending on your needs. With the latest generation of Powerboost, you can easily switch between modes by flicking the high beam lever. Please note that the auxiliary light is supplied in E-approved mode, and instructions for activating Powerboost are included.

Flashing light pattern

Single flash (ECE R65 approved), double flash, triple flash, quadruple flash, continuous hyper flash.

Included:

  • One Ledson Epix9+ Strobe LED extra light 9"
  • Bracket, bolts and screws for attaching the strobe with either one or two mounting points
  • DT connector (6-pin) to complete with
  • Installation instructions

Technical data:

  • 180W (4 x 20W Cree LED + 4 x 10W Cree LED)
  • Rated power: 154W (Powerboost)
  • IP69K (water/dust proof)
  • Cable with 6-pin DT connector
  • Voltage 9-36 V
  • Load E-approved mode: 1.5A (12V) and 0.7A (24V) (high beam only, without position light)
  • Load high beam Powerboost mode: 12,6A (12V) and 5,6A (24V) (high beam only, without position light)

NOTE: The DT connector must not be cut as this increases the risk of moisture damage and voids the warranty.