Epix9+ Driving light 9" White (Powerboost)

Swedish developed design
Epix9+ from Ledson is a groundbreaking range of auxiliary lights that take your car's appearance to a new level. With a design language uniquely created by Ledson, it combines exceptional performance and style to give your vehicle an eye-catching and exclusive look. Perfect balance between powerful lighting and stylish design.

Dynamic position light
The Epix9+ features a dynamic position light that lights up with an elegant movement, sweeping from one side of the auxiliary light to the other before fully lighting up. This visual effect gives your car a distinctive and unique look.

Pulse-controlled Powerboost - Maximize brightness easily
The Epix9+ is equipped with Ledson Powerboost - a powerful extra mode for those times when you need, or want, maximum light. Activate Powerboost easily by using the high beam lever, giving you full control over the brightness depending on your needs. With the latest generation of Powerboost, you can easily switch between modes by flicking the high beam lever. Please note that the auxiliary light is supplied in E-approved mode, and instructions for activating Powerboost are included.

Included:

• One Ledson Epix9+ LED auxiliary light 9"
• Bracket, bolts and screws to attach the extra light with either one or two fixing points
• DT connector (4-pin) to complete with
• Installation instructions

Technical data:

• 180W (4 x 20W Cree LED + 4 x 10W Cree LED)
• Rated power: 154W (Powerboost)
• IP69K (water/dust proof)
• Cable with 4-pin DT connector
• Voltage 9-36 V
• Load E-approved mode: 1.5A (12V) and 0.7A (24V) (high beam only, without position light)
• Load high beam Powerboost mode: 12,6A (12V) and 5,6A (24V) (high beam only, without position light)

NOTE: The DT connector must not be cut as this increases the risk of moisture damage and voids the warranty.