Favourites

ABS-wheels

Air filters

Boot mats

Brake caliper paint

Driving lights

Gear knobs

H7 LED

Imaz IM5

Japan Racing

LED bars

Maxton Design

Ocean MK18

Poppy

Rims

Sport seats

Window tint

Wind deflectors

Popular products

Audi A4 B7

Audi A4 B8

Audi A6 4G

BMW E61

BMW E90/E91

BMW F10/F11

BMW F20/F21

BMW F30/F31

Volvo S60

Volvo V60

Volvo V70N 2000-2004

Volvo V70NN 2008-2016

Volvo XC60

VW Caddy

VW Golf 4

VW Golf 7

Popular cars

About us

Sustainability

This is SC Styling

Information

Products

🔥 15%, 20%, or 25% off Mix & Match – cup spoiler, diffuser, side skirts, and splitters 🔥

A power resistor that helps the car's light monitoring system (Canbus) to detect the presence of an LED lamp instead of a halogen. Since an LED lamp requires much less power than a classic halogen, an extra resistor may be needed to prevent the Canbus system from thinking that the lamp is broken. This is a splice that is fitted to the existing lamp holder and then attached to the reflector. It's plug and play and you don't have to cut any wires to plug it in.

Prevents alerts from the car's light monitoring system (Canbus).

T20 LED Resistance. Did you assemble a LED lamp and want to get rid of warning for lampfault this is the resistance you need. Price per pc.

Förhindrar varningar från bilens ljusövervakningssystem (Canbus).

<h1>Warning Resistance/ Effect Resistance/ Canbus Resistance for T10 bulbs</h1>
 If you assemble a led lamp in car that uses less current than normal halogene then the car can alert and shut down the flow of electricity to the lamp as it believes the lamp is broken. With one of our resistances connected between lamp and contact you get rid off this problem and can have LED lamps, e.g foglights in a car with canbus system without any problem.   Attention!!  This product gets extremely hot, be careful when connecting these on metal. Do not attach to plastic

Canbus resistor for H7 lamps. If you install an LED lamp in your car that draws much less current than a standard halogen, the car may reject it and cut off the power supply to that lamp because the car thinks the lamp is broken. With one of our resistors fitted between the lamp and the plug you avoid this problem and can have LED Lamps without warning. It is common for this to occur, for example, in the fog lights of a car with a Canbus system without any problems with this.
Price per piece
NOTE! These get very hot so be sure to mount these on metal and not on plastic

<h1>Warning resistors/ EffectResistor / CanbusResistor to H8 and H11-lamps</h1>
 If you mount a LED lamp in car that consumes less electricity than an ordinary halogen car can warn and close electricity to the lamp as car believes it is broken . With our resistors assembled between lamp and contact you do not get a problem and can have LED lamps as foglight in cars with canbus system without problem with these. Price per pc. ATTN!! Beware that lamps are sold per pair while resistors sold per piece!! These get really warm so be careful with assembling them on metal and not on plastic

<h1>Warning resistors /EffectResistor /CanbusResistor to HB3 and HB4 lamps</h1>
 If you mount a LED lamp in car that consumes more electricity than an ordinary halogen lamp the car can warn and close electricity to the lamp as car believes it is broken. With our resistors assembled between lamp and contact you will not have that problem and can have LED lamps as foglight in car for example. Price per pc. ATTN!! Beware that lamps are sold per pair while resistors sold per piece!! These get really warm so be careful with assembling them on metal and not on plastic

A small disassembly tool to easily and smoothly remove and replace your turn signal indicators.

A small disassembly tool to easily and smoothly remove and replace your turn signal indicators T10.

Universal standard size for cup holder. Allows you to put the atmosphere in the car. Lights in red, green and blue light. This is a must in every futuristic car. The small details set the boundaries and this is no exception.

Put the atmosphere in the car with LED light in the cup holder

21w resistor for LED lamps. Can be used for LED lamps and LED indicators on cars with light control (CANBUS). 
Attn! 
<ul>
<li>These are placed airily when they are warm and are beeing used. </li>
</ul>
<ul>
<li> To deflect heat they can be assembled agains metal. </li>
</ul>

21w resistor for LED lamps. Can be used for LED lamps and LED indicators on cars with light control (CANBUS).

A headlight cover made of PVC to keep your headlights nice and clean. The covers keep out dust, water etc. Your headlights will be able to endure greater temperature differences, harsher conditions and have a longer life.
The covers are suitable for all cars. Simply cut it to the dimensions that suit your car. 70mm 75mm 80mm 85mm 90mm 95mm 100mm

Fits all cars. Cut based on your own needs.

5w Resistance for LED lamps. Can be used for LED lamps and LED indicators on cars with light control (CANBUS).
Attn! 
<ul>
<li>These are placed airily when they are warm and are being used.</li>
<li>To deflect heat they can be assembled agains metal.</li>
</ul>

5w Resistance for LED lamps. Can be used for LED lamps and LED indicators on cars with light control(CANBUS).

Canbus resistor for H1 and H3 lamps. If you install an LED lamp in your car that uses much less power than a standard halogen, the car may tell you and cut off the power supply to that lamp because the car thinks the lamp is broken. With one of our resistors fitted between the lamp and the plug you avoid this problem and can have LED Lamps without warning. It is common for this to occur, for example, in the fog lights of a car with a Canbus system without any problems with this.
Price per piece
NOTE! These do run very hot, so be sure to mount them on metal and not plastic.

<h1>Warning resistors /EffektResistor /CanbusResistor to BAY15D lamps </h1>
 If you mount a LED lamp in car that consumes more electricity than an ordinary halogen car can warn and close electricity to the lamp as car believes it is broken . with our resistors assembled between lamp and contact you have not a problem and can have LED lamps as foglight in car with canbus system without problem with these. Price per pc. ATTN!! Beware that lamps are sold per pair while resistors sold per piece!! these get really warm so be careful with assembling them on metal and not on plastic

<h1>Warning resistors /EffektResistor /CanbusResistor to H4 lamps </h1>
 If you mount a LED lamp in car that consumes more electricity than an ordinary halogen car can warn and close electricity to the lamp as car believes it is broken . with our resistors assembled between lamp and contact you have not a problem and can have LED lamps as foglight in car with canbus system without problem with these. Price per pc. ATTN!! Beware that lamps are sold per pair while resistors sold per piece!! these get really warm so be careful with assembling them on metal and not on plastic

Prevents warnings from the car's light monitoring system (Canbus).

BA15 Socket

BA15D LED (P21/5W LED)

BA9 Socket

BAY15D (P21/5W)

Festoon lamps

Fog light lamps

LED High beam and Low beam

LED resistors

Other Lights

T10 Socket

T20 Socket

T5 Socket

Choose from our categories of LED lights. All LED lights are normally in stock so you can expect a fast delivery. If you are unsure which type of lamp you should have, you are always welcome to contact our customer service by phone on 018-149300 or email info@scstyling.com.