Coilovers that fits Volvo V70 08- & V60 11-16

Extremely affordable coilovers for Vollvo S60, V60, V70, S80.

Fits
S60 2010-2018
V60 2010-2018
V70 2008-2016
S80 2007-2016
Fits AWD on all models. Also fits cars with levelling, but then requires Volvo strut bearing with part no. VOV70BUSS001
Not recommended for electric hybrid due to heavier weight

LowersFront: 0-90mm
Rear: 40-110mm

These dampers have two different adjustments:

1. Damper adjustment (to raise and lower)
2. Spring adjustment to adjust the spring tension.

The spring should not be loose. If it does then the spring tension is not done correctly.

Install the damper with top bearing (strut bearing). Make sure it is firmly in place. Adjust the upper nut by hand until the spring is fixed between the adjusting nut and the strut bearing. Turn the lower nut until it reaches the upper nut. Adjust the upper nut with the tool until there is about 5 mm between the nuts. Then you have the correct spring pressure. Unscrew the lower nut again and lock it with the tool.

After that, you can adjust the damper to the desired level, and lock the nut with the tool. The height is only adjusted with the damper. If you adjust with the spring, it will be wrong and then the suspension will not work as it should.

ATTENTION!! Universal picture