Pressure Pipe that fits Volvo 850/Svc70 Turbo

Air Flow at 0.15bar pressure drop: 452CFM (342CFM), 32% higher !
-This pipe position is 550mm shorter than the OEM pipes which increases the throttle respons.
- These hoses can handle very high temperature and pressure!!
- Fits all cars in list below!!

The pressure pipes are manufactured in 2,5” mandrel bent seamless aluminum pipes. These pipes reverse the flow through the intercooler, the air that goes to the throttle body is taken from the bottom of the intercooler..

Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire. These hoses can handle very high temperature and vacuum.

that the OEM intercooler pipes and hoses was designed for the power level the car was built for and a power increase or even very hard use of the car in a standard version may cause that the OEM pipes and hoses don’t have the performance you need . So already at increased boos pressure/software upgrade /chip tuning our pressure pipe will give better performance and durability!

* ATTN! Luftstyrningen to luftfilerboxen Does not fit vid Assembly av these Pressurepipe. You can mount it if you cut the hose against throttle body about 25mm.

This is included:
1. Pressurepipe 2pcs
2. Silicone hoses 5pcs
3. Hoseclamps T-bolt 6pcs
4. Hose clamps standard 3pcs


Fits:

Volvo 850
modelyears : 1994-1997
Engine:
- All gasoline Turbo-models
- 2.0T 2.3T 2.4T 2.5T T5 T5-R
both Manual and Automatic gearbox.

Volvo C70 S70 V70 XC70
modelyears : 1998
Engine:
- All gasoline Turbo-models
- 2.0T 2.3T 2.4T T5
both Manual and Automatic gearbox.