Bigpack SAAB 9-5 02-09 Intercooler
Intercooler
Article number: 911-STOR-95
Markets Absolutely best intercooler solution for SAAB 9-5!
Show price history
Årsmodell
Färg
60 days open purchase on stock itemsOver 100,000 satisfied customersSuper-fast deliverySupport that assists you
Trygg E-handel
We are certified with Trygg E-handel
This kit is for you that has high horsepower goal and want to upgrade to the absolute best!Only to change our performance intercoo´ler is a giant improvement but together with our pressurepipe improvement is enormous. Our pressure pipes have better flow than original pressure pipe! MAila oss om ni vill se grafiska data.
- Intercooler Corevolume: 11803cm3 (6379cm3),85% higher than original!
- Air Flow at 0.15bar pressure drop: 268CFM (192CFM), 40% higher!
- Post Intercooler Air Temperature at same conditions: 32°C (53°C), this is 21°C lower!
See chart below!
- Fits straight into give carmodels!
BigPack includes a full aluminum performance intercooler and a complete 2,5” pipe kit and silicone hoses. This package replaces everything between turbo and throttlehousing and gives drastically improved flow/coolingeffect compared to original.
Manufactured in all Aluminium construction with CAD designed, flow optimised cast end tanks and optimised core design to achieve the best possible cooling efficiency combined with the lowest pressure drop!
Pressurepipe is made of 2,5 extruded aluminiumpipe that has been bent to correct shape!
Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire. These hoses can handle very high temperature and vacuum.
Worth considering is that original intercooler designed for the effect car had as original and increasing effect or hard load of car with original executement the performance is not enough. So already at increased boost pressure /software upgrade/tuning our bigpack gives better performance!
A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. But actually the performance intercooler are far better than most FMIC installations where only a core with small front surface are possible to install and often also installed partially behind theof bumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved.
performance intercooler comes with all brackets and screw holes which necessary for an safe and easy installation.
Included parts in Bigpack:
1. Intercooler
2. Pressurepipe
3. Silicone hoses 5pcs
4. Hose clamps T-Bolt 5pcs
5. Hose clamps standard 3-5pcs
- Intercooler Corevolume: 11803cm3 (6379cm3),85% higher than original!
- Air Flow at 0.15bar pressure drop: 268CFM (192CFM), 40% higher!
- Post Intercooler Air Temperature at same conditions: 32°C (53°C), this is 21°C lower!
See chart below!
- Fits straight into give carmodels!
BigPack includes a full aluminum performance intercooler and a complete 2,5” pipe kit and silicone hoses. This package replaces everything between turbo and throttlehousing and gives drastically improved flow/coolingeffect compared to original.
Manufactured in all Aluminium construction with CAD designed, flow optimised cast end tanks and optimised core design to achieve the best possible cooling efficiency combined with the lowest pressure drop!
Pressurepipe is made of 2,5 extruded aluminiumpipe that has been bent to correct shape!
Custom made high quality silicone hoses with 4 layers of polyester reinforcement and steel wire. These hoses can handle very high temperature and vacuum.
Worth considering is that original intercooler designed for the effect car had as original and increasing effect or hard load of car with original executement the performance is not enough. So already at increased boost pressure /software upgrade/tuning our bigpack gives better performance!
A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. But actually the performance intercooler are far better than most FMIC installations where only a core with small front surface are possible to install and often also installed partially behind theof bumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved.
performance intercooler comes with all brackets and screw holes which necessary for an safe and easy installation.
Included parts in Bigpack:
1. Intercooler
2. Pressurepipe
3. Silicone hoses 5pcs
4. Hose clamps T-Bolt 5pcs
5. Hose clamps standard 3-5pcs