10%
Audi Seat Skoda VW 2.0T FSI Intercooler
Intercooler
Article number: 911-ICM-180
Markets best intercooler for Audi Seat Skoda VW 2.0T FSI!
Show price history
Backorder item | Sent in about 7 working days
60 days open purchase on stock itemsOver 100,000 satisfied customersSuper-fast deliverySupport that assists you
Trygg E-handel
We are certified with Trygg E-handel
Corevolume: 13342cm3 (7676cm3),74% higher than original
- Air Flow at 0.15bar pressure drop: 448CFM (335CFM), 34% higher than original! See chart below!
- Post Intercooler Air Temperature at same conditions: 29°C (37°C), 8°C lower! See chart below!
- Fits straight into give carmodels!
Manufactured in all Aluminium construction with CAD designed, flow optimised cast end tanks and optimised core design to achieve the best possible cooling efficiency combined with the lowest pressure drop!
Worth considering is that original intercooler designed for the effect car had as original and increasing effect or hard load of car with original executement the performance is not enough. So already at high loading pressure/softwareupgrade/tuning our intercooler will give a better performance!
The original intercooler has Plastic ic tanks that can't manage higher loading pressure during longer periods that is why our intercooler gives longer durability.
A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. Actually this highperformance intercooler is much better than most FMIC installations there you only have place for core package that has too small cooling area and often with blocked airsupply of bumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved.
This high perfomance intercooler comes with all necessary parts for assembly in car
- Air Flow at 0.15bar pressure drop: 448CFM (335CFM), 34% higher than original! See chart below!
- Post Intercooler Air Temperature at same conditions: 29°C (37°C), 8°C lower! See chart below!
- Fits straight into give carmodels!
Manufactured in all Aluminium construction with CAD designed, flow optimised cast end tanks and optimised core design to achieve the best possible cooling efficiency combined with the lowest pressure drop!
Worth considering is that original intercooler designed for the effect car had as original and increasing effect or hard load of car with original executement the performance is not enough. So already at high loading pressure/softwareupgrade/tuning our intercooler will give a better performance!
The original intercooler has Plastic ic tanks that can't manage higher loading pressure during longer periods that is why our intercooler gives longer durability.
A normal misunderstanding is that you can't get good cooling effect of an intercooler with this position and frontmounted intercooler / FMIC should be much better. Actually this highperformance intercooler is much better than most FMIC installations there you only have place for core package that has too small cooling area and often with blocked airsupply of bumper beam which will reduce cooling capacity even further and often cooling below the OEM intercooler are achieved.
This high perfomance intercooler comes with all necessary parts for assembly in car